This master thesis is developed based on the desire of the water and sewage department in the municipality of Karlskrona. The department, which vouches for the quality of produced drinking water and sewage cleaning, was in need of help dealing with risk analysis.The water and sewage department is obliged to identify and assess risks according to Swedish legislation. However, no guides for this purpose regarding safety, health, environment and quality were available. The aim of this report was to accomplish a guideline for the performance of risk analysis within water and sewage plants. If the guideline is used, the requirements in the legislation will be obtained.

This report is about the impact climate change has on the water and sewage systems in general, and the situation in the municipality of Karlstad in particular. Which vulnerabilities are linked to water and sewage systems with regard to climate change and extreme weather situations, what are the possibilities to adapt the system to this and what significance does climate adaptation of the water and sewage systems have in relation to sustainable development?To answer these questions I have studied literature on the subject and interviewed several people who work with these types of questions. The answers I have received state that there are a multitude of vulnerabilities linked to the water- and sewage systems, but that there are also many strong interests which strive to take measures and adapt to a changed climate. I have also come to the conclusion that the starting points and views of the possibilities to act differs between the people that I have interviewed, but that theses problems are built into the concept of democracy..

The management of water resources and waste water varies between the countries of the EU. For many years, a large part of the water in Europe has been contaminated by, among other things, insufficiently treated waste water and emissions from agriculture. The EU Water Framework Directive 2000/60/EC and the Urban Waste Water Directive 91/271/EEC are intended to harmonize fresh-water management and waste water management within the whole EU, aiming at safeguarding drinking water of good quality and a high quality of all water within the EU today and in the future. There are however some problems concerning the waste-water directive. One problem is the huge investment needed in Slovakia to fulfil the demands of the waste-water directive for waste-water management in larger communities (with more than 2000 inhabitants).

Discharge of inadequately treated waste water containing nutrients such as phosphorus and nitrogen as well as organic matter and bacteria is associated with a risk of eutrophication and contamination. The Swedish government has decided upon several Environmental Quality Objectives aiming to reduce the emissions of nutrients to water bodies.In Sweden, there are between 675 000 to 1 000 000 on-site sewage systems. Recent studies have shown that the function of small sewage treatment plants is in many cases insufficient. To prevent this regular service and supervision by a professional is needed. The focus of this study are small sewage treatment plants which use a technique where mechanical, chemical and/or biological reduction of pollutants is being used in the same facility to reduce nutrients in household wastewater.The aim of the study is to investigate how different municipalities ensure that small sewage treatment plants fulfill the requirements and reduce pollutants as efficient as the manufacturers claim.

Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

The aim of this project was to describe and to evaluate five small sewage treatment plants in the municipality of Laholm, Sweden, in order to investigate the treatment efficiency and to evaluate if effluents comply with discharge permits. The treatment systems were designed to treat effluents from 90 to 500 population equivalents. A report on the design and the present state of each sewage treatment plant has been made. This was made based upon previous documentation on water quality and by new sampling campaign as there were only a few previous measurements. Data has been evaluated and remedial actions proposed for those treatment plants that don?t fulfill discharge permits.

Starting point to this Paper is the idea and wish to adapt the society and its different activities to a recycle society. A building area in Göteborg is planned and investigated for such adaptation. In the district named Skogaberg, about 130 households totally are planned from what 20 are blocks of flats. The idea with this project is to constitute an alternative sewage system, a Blackwater system, were the fractions of most nutrients and least pollution are separated, taken care of and utilised. The aim is to get a market and use the nutrients of the organic waste from the household in agriculture use.

Filtermaterial av 75 % torv och 25 % kolaska har använts under 2 respektive 4 år för rening av avloppsvatten från två biltvättar. Jämförelse med Kristianstads kommuns riktvärden för avloppsvatten från fordonstvättar visar att filtren fungerat. För avfallsklassning krävs kunskap om innehåll av miljöfarliga ämnen i produkter som använts i tvätthallarna. I brist på kunskap om innehåll av ej analyserade miljöfarliga ämnen i filtren anses förbränning vara ett bra omhändertagande ur miljösynpunkt, då energi och aska återvinns..

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Eutrophication of lakes and streams are nowadays a well known environmental problem and implies an enrichment of the nutrients phosphorus (P) and nitrogen (N). Phosphorus is considered to be the most important component for the growth of aquatic plants and leads in too large quantities to an intensification of growth. Phosphate (PO4) is the fraction of phosphorus that can easiest be taken up by plants and thus have the greatest impact on eutrophication. Increased plant growth in lakes and unfavorable conditions for aquatic animals are two examples of negative consequences. A significant portion of the increased nutrient supply to nearby water can be derived to phosphate leaching from agricultural areas, where private sewers and agriculture is two main sources.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

Sewage sludge contains plant nutrients and has earlier been utilised as fertilizer to cropland. Unfortunately not only plant nutrients but also heavy metals, pathogens and organic contaminants tend to accumulate in sludge. The suitability to use sewage sludge in agriculture has therefore been subject to several discussions over the years. The Swedish food industry does no longer accept sludge as fertiliser for Swedish producers. In 1999 the Swedish parliament accepted several objectives for environmental protection. In order to prevent environmental pollution and further exploitation of the earth crust, one of these objectives confirm that phosphorous from sewage shall be recirculated to arable land.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.